Amorphous alloy dry-type transformer represents the meaning of each letter and number in the transformer, do you know?

Release time:

2024-01-19

Source:


Amorphous alloy as a super quenching technology, iron, cobalt, boron, silicon and other liquid condensate radiation to a high speed of the chassis and sharp cooling, constitute a thin strip of 0.02 mm-0.04mm. It has excellent soft magnetic properties, corrosion resistance, wear resistance and high resistivity. SCBH15 series amorphous alloy dry-type transformer is a better energy-saving dry-type transformer.

The no-load loss of SCBH15 series amorphous alloy dry-type transformer is 75% lower than that in Table 4 of GB/T10228, and the load loss is 15% lower than that in Table 4 of GB/T10228. It has the characteristics of maintenance-free, damp heat resistance, fire prevention, explosion prevention, small partial discharge capacity, strong heat dissipation ability, etc, any place where ordinary dry-type transformers are used today (including airports, stations, urban subways, high-rise buildings and power plants, etc.) can be replaced by amorphous alloy dry-type transformers, which can be placed in the load center and conform to the needs of modern large cities with high-density loads. The high-voltage coil is wound with H-class high-strength enameled wire, the low-voltage coil is wound with copper foil, vacuum pressure pouring, the iron core is made of amorphous alloy strip, the rectangular section, the four-frame and five-column structure, the side note flows through zero sequence magnetic flux, and the short circuit resistance is strong.

SCBH-800KVA amorphous alloy dry-type transformer in the transformer on behalf of the letters and numbers are as follows:

"S" means three-phase transformer;

"C" indicates resin casting type;

"B" means low voltage foil coil;

"H" means amorphous alloy iron core;

"15" indicates the performance degree code;

"800" means the rated capacity is 800KVA;

"10" indicates that the voltage level of the high voltage coil is 10KV.