GCS series low-voltage withdrawable switchgear
GCS series devices are suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textiles, high-rise buildings and other industries. In large power plants, petrochemical systems and other places with high degree of automation and computer interface, it is used as a low-voltage complete power distribution device for power distribution, centralized motor control and reactive power compensation in power generation and power supply systems with three-phase AC frequency of 50(60)HZ, rated working voltage of 380(400)V, (660V) and rated current of 4000A and below.
Classification:
Mailbox:
Key words:
GCS series low-voltage withdrawable switchgear
Description
GCS series devices are suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textiles, high-rise buildings and other industries. In large power plants, petrochemical systems and other places with high degree of automation and computer interface, it is used as a low-voltage complete power distribution device for power distribution, centralized motor control and reactive power compensation in power generation and power supply systems with three-phase AC frequency of 50(60)HZ, rated working voltage of 380(400)V, (660V) and rated current of 4000A and below.
Products conform to the standard: GB7251 "low voltage switchgear", JB/T9661 "low voltage withdrawal type switchgear", IEC60439-1 "low voltage switchgear and control equipment".
Normal conditions of use
1. Ambient air temperature: maximum temperature + 40C, minimum temperature-5C; The average temperature within 24 hours shall not be higher than +35C;2. The relative humidity of the surrounding air shall not exceed 50% when the maximum temperature is + 40C. Larger relative humidity is allowed at lower temperature, such as 90% when + 20C. It should be considered that frost may occur accidentally due to temperature changes. Altitude: indoor use shall not exceed 2000m.
2. When the device is installed, the inclination of the device to the vertical machine shall not exceed 5 and the whole set of cabinets shall be relatively flat (in line with GBJ232-82 standards);5. The device shall be installed in a place without severe vibration and impact and insufficient corrosion of electrical components. 6. When users have special requirements, please negotiate with our company to solve them.
Online
Message
If you have any suggestions or feedback on our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.
Contact Us
Email:
WhatsApp:
Address:
Xingye Road,Industry Gathering Area,Jiaxian,Henan Province,China.
Please tell us what you need
Our engineers will contact you within 12 hours and provide free proposal and quotation.